Fanuc Alarm 4549: ILLEGAL TOOL DATA FORMAT
Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series
The quantity of tool data patterns to be saved is too large to fit the usable area (16 KB).
Have you faced Fanuc Alarm 4549 ILLEGAL TOOL DATA FORMAT on your machine? Share your experience or troubleshooting tips in the comments below to help other CNC operators and programmers clear this error faster!
Fanuc Alarm 5196: ILLEGAL OPERATION (HPCC) Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description Detach operation was performed in HPCC mode. (If detach operation is performed in HPCC mode, this alarm is issued after the currently executed block terminates.) Have you faced Fanuc Alarm 5196 ILLEGAL OPERATION (HPCC) on…
Fanuc Alarm 5448: CRC:INTERFERENCE TO AVD. Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description In the interference check evade function of cutter compensation, a further interference occurs for an already created interference evade vector. Have you faced Fanuc Alarm 5448 CRC:INTERFERENCE TO AVD. on your machine? Share your experience…
Fanuc Alarm 5044: G68 FORMAT ERROR Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description M series;A G68 command block contains a format error. This alarm is issued in the following cases;1. I, J, or K is missing from a G68 command block (missing coordinate rotation option).;2. I, J,…
Fanuc Alarm 5006: TOO MANY WORD IN ONE BLOCK Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The number of words specified in a block exceeded 26 in the HPCC mode. Have you faced Fanuc Alarm 5006 TOO MANY WORD IN ONE BLOCK on your machine? Share your experience…
Fanuc Alarm 0: PLEASE TURN OFF POWER Fanuc Control Model: Series 16 / 18 / 21, 16i / 18i / 21i, 0i Series Fanuc Alarm 0 (PLEASE TURN OFF POWER) is a standard notification alarm that occurs when a parameter requiring a power cycle/reboot is modified on the CNC control. Follow this quick guide to…
Fanuc Alarm 5030: ILLEGAL COMMAND (G100) Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description T series The end command (G110) was specified before the registratioin start command (G101, G102, or G103) was specified for the B–axis. Have you faced Fanuc Alarm 5030 ILLEGAL COMMAND (G100) on your machine? Share…