Fanuc Alarm 4600: T, C COMMAND IN INTERPOLATION

Fanuc Alarm 212: ILLEGAL PLANE SELECT Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description M series The arbitrary angle chamfering or a corner R is commanded or the plane including an additional axis. Correct the program. Have you faced Fanuc Alarm 212 ILLEGAL PLANE SELECT on your machine? Share…

Fanuc Alarm 5000: ILLEGAL COMMAND CODE Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The specified code was incorrect in the high–precision contour control (HPCC) mode. Have you faced Fanuc Alarm 5000 ILLEGAL COMMAND CODE on your machine? Share your experience or troubleshooting tips in the comments below to…

Fanuc Alarm 4532: IMPROPER U/V MACRO NUMBER Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The number of an inhibited macro (number beyond the range from 01 to 99) was specified in a U or V macro command. Have you faced Fanuc Alarm 4532 IMPROPER U/V MACRO NUMBER on…

Fanuc Alarm PS006: Illegal Use of Minus Sign Fanus Control Model: Series 0i (Model C, D, and F), Series 30i / 31i / 32i, Series 16i / 18i / 21i Description Minus Sign – is written in a place where it is not allowed. This alarm can sometimes be caused by a logical error in…

Fanuc Alarm 5198: FSSB: ID DATA NOT READ Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description Temporary assignment failed, so amplifier initial ID information could not be read. Have you faced Fanuc Alarm 5198 FSSB: ID DATA NOT READ on your machine? Share your experience or troubleshooting tips in…

Fanuc Alarm 251: ATC ERROR Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description This alarm is issued in the following cases;– An M06T_ command contains an unusable T code.;– An M06 command has been specified when the Z machine coordi nate is positive.;– The parameter for the current…