Fanuc Alarm 4522: EXCESS NIBBLING MOVEMENT (C)

Fanuc Alarm 4540: MULTI-PIECE COMMAND WITHIN MACRO Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The command for taking multiple workpieces (G73, G74) was specified when a U or V macro was being stored. Have you faced Fanuc Alarm 4540 MULTI-PIECE COMMAND WITHIN MACRO on your machine? Share your…

Fanuc Alarm 31: ILLEGAL P COMMAND IN G10 Fanus Control Model: Series 16i / 18i / 21i (Models A and B) and Series 30i / 31i / 32i Description When you use the ‘P’ command incorrectly with a G10 code. The value written after ‘P’ is either outside the offset number that is available in…

Fanuc Alarm 3: TOO MANY DIGITS Fanus Control Model: 16/18/21 Fanuc Alarm Description Data exceeding the maximum allowable number of digits was input. (Refer to the item of max. programmable dimensions.)

Fanuc Alarm PS006: Illegal Use of Minus Sign Fanus Control Model: Series 0i (Model C, D, and F), Series 30i / 31i / 32i, Series 16i / 18i / 21i Description Minus Sign – is written in a place where it is not allowed. This alarm can sometimes be caused by a logical error in…

Fanuc Alarm 5214: SCREEN COPY: DATA TRANSFER ERROR Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description Data transfer to the memory card failed. Check whether the memory card space is insufficient and whether the memory card was removed during data transfer. Have you faced Fanuc Alarm 5214 SCREEN…

Fanuc Alarm 5227: FILE NOT FOUND Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description A specified file is not found during communication with the built–in Handy File. Have you faced Fanuc Alarm 5227 FILE NOT FOUND on your machine? Share your experience or troubleshooting tips in the comments below…