Fanuc Alarm 239: BP/S ALARM
Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series
While punching was being performed with the function for controlling external I/O units,background editing was performed.
Have you faced Fanuc Alarm 239 BP/S ALARM on your machine? Share your experience or troubleshooting tips in the comments below to help other CNC operators and programmers clear this error faster!
Fanuc Alarm 5229: WRITE PROTECTED Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description A floppy disk in the built–in Handy File is write protected. Have you faced Fanuc Alarm 5229 WRITE PROTECTED on your machine? Share your experience or troubleshooting tips in the comments below to help other CNC…
Fanuc Alarm 5064: DIFFERRENT AXIS UNIT (IS–B, IS–C) Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description Circular interpolation has been specified on a plane consisting of axes having different increment systems. Have you faced Fanuc Alarm 5064 DIFFERRENT AXIS UNIT (IS–B, IS–C) on your machine? Share your experience or…
Fanuc Alarm 5057: M–NET BOARD SYSTEM DOWN Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description Transmission timeout error (parameter No. 177) ROM parity error CPU interrupt other than the above Have you faced Fanuc Alarm 5057 M–NET BOARD SYSTEM DOWN on your machine? Share your experience or troubleshooting tips…
Fanuc Alarm 5244: TOO MANY DI ON Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description Even when an M code was encountered in automatic operation mode, the flexible synchronization mode signal was not driven on or off. Check the ladder and M codes. Have you faced Fanuc Alarm…
Fanuc Alarm PS900: G72.1 NESTING ERROR Fanus Control Model: Series 15i, 16i, 18i, 21i, and 30i/31i/32i Description This alarm appears when the “G72.1” (Subprogram Call for Figure Copy) command is used incorrectly in CNC programming. The main reason for this alarm is exceeding the “Nesting” limit, that is, when you call several subprograms consecutively within…
Fanuc Alarm 4602: ILLEGAL T-CODE Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The specified T command is not cataloged on the tool register screen. Have you faced Fanuc Alarm 4602 ILLEGAL T-CODE on your machine? Share your experience or troubleshooting tips in the comments below to help other…