Fanuc Alarm 230: R CODE NOT FOUND
Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series
The infeed quantity R has not been instructed for the G161 block. Or the R command value is negative. Correct the program.
Have you faced Fanuc Alarm 230 R CODE NOT FOUND on your machine? Share your experience or troubleshooting tips in the comments below to help other CNC operators and programmers clear this error faster!
Fanuc Alarm 5110: IMPROPER G–CODE Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description An illegal G code was specified in look–ahead control mode (multi blocks are read in advance). A command was specified for the index table indexing axis in look– ahead control mode (multi blocks are read…
Fanuc Alarm 4506: ILLEGAL COMMAND IN SHARE PROOFS Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description In a shear proof (G86) command, the tool size (P) was set to zero, or the blanking length (I) was 1.5 times larger than the tool size (P) or less. Alternatively, I,…
Fanuc Alarm 5156: ILLEGAL AXIS OPERATION Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description In look–ahead control mode (multi blocks are read in advance), the controlled axis selection signal (PMC axis control) changes. In look–achead control mode (multi blocks are read in advance), the simple synchronous axis selection…
Fanuc Alarm 4603: C AXIS SYNCHRONOUS ERROR Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The difference between the position deviation value of C1 axis and C2 axis exceeds the parameter value (No. 16364, 16365) with the C–axis synchronous control function. Have you faced Fanuc Alarm 4603 C…
Fanuc Alarm 5135: FSSB: ERROR MODE Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description FSSB has entered error mode. Have you faced Fanuc Alarm 5135 FSSB: ERROR MODE on your machine? Share your experience or troubleshooting tips in the comments below to help other CNC operators and programmers clear…
The Fanuc SV040 alarm is a servo-related error that indicates a N-th Axis Overload. This means the CNC system has detected that the motor is drawing too much current or is working too hard to maintain its position or movement, potentially leading to overheating. Common Causes The SV040 alarm can be triggered by either mechanical…