Fanuc Alarm 70: NO PROGRAM SPACE IN MEMORY
Fanuc Alarm 70: NO PROGRAM SPACE IN MEMORY
Fanus Control Model: 16/18/21
Fanuc Alarm Description
The memory area is insufficient. Delete any unnecessary programs, then retry.
Similar Posts
Fanuc Alarm 5409: ILLEGAL PARAMETER IN G41.3
Fanuc Alarm 5409: ILLEGAL PARAMETER IN G41.3 Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The parameter setting (No. xxxx to xxxx) that determines the relationship between the rotation axis and rotation plane is incorrect. Have you faced Fanuc Alarm 5409 ILLEGAL PARAMETER IN G41.3 on your machine? Share…
Fanuc Alarm 86: DR SIGNAL OFF
Fanuc Alarm 86: DR SIGNAL OFF Fanus Control Model: Fanuc 16, 18, and 21 Series (including i-series), Fanuc 0/0i Series (0-M, 0-T, 0i-MA, 0i-TB, 0i-MC, etc.) Description This simply means that the controller is not receiving a “Data Set Ready” (DSR) signal from the external device PC or laptop. This problem mostly occurs when you…
Fanuc Alarm 414: SERVO ALARM: n–TH AXIS – DETECTION RELATED ERROR
Fanuc Alarm 414: SERVO ALARM: n–TH AXIS – DETECTION RELATED ERROR Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description N–th axis (axis 1–4) digital servo system fault. Refer to diagnosis display No. 200, 201, and No.204 for details. Have you faced Fanuc Alarm 414 SERVO ALARM: n–TH AXIS…
Fanuc Alarm 251: ATC ERROR
Fanuc Alarm 251: ATC ERROR Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description This alarm is issued in the following cases;– An M06T_ command contains an unusable T code.;– An M06 command has been specified when the Z machine coordi nate is positive.;– The parameter for the current…
Fanuc Alarm 4520: T, M INHIBITED IN NIBBLING-MODE
Fanuc Alarm 4520: T, M INHIBITED IN NIBBLING-MODE Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description T code, M code, G04, G70 or G75 was specified in the nibbling mode. Have you faced Fanuc Alarm 4520 T, M INHIBITED IN NIBBLING-MODE on your machine? Share your experience or troubleshooting…
Fanuc Alarm 230: R CODE NOT FOUND
Fanuc Alarm 230: R CODE NOT FOUND Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The infeed quantity R has not been instructed for the G161 block. Or the R command value is negative. Correct the program. Have you faced Fanuc Alarm 230 R CODE NOT FOUND on your…