Fanuc Alarm 60: SEQUENCE NUMBER NOT FOUND

Fanuc Alarm 11: NO FEEDRATE COMMANDED Fanus Control Model: 16/18/21 Fanuc Alarm Description Feedrate was not commanded to a cutting feed or the feedrate was inadequate. Modify the program.

Fanuc Alarm 34: NO CIRC ALLOWED IN ST–UP /EXT BLK Fanus Control Model: Series 0i / 16i / 18i / 21i / 31i / 32i Description This alarm (Fanuc Alarm 34) occurs when you are starting (Start-up block) or ending (Cancel block) Cutter Radius Compensation using G41 or G42, and write Circular Interpolation (G02/G03) instead…

Fanuc Alarm 3: TOO MANY DIGITS Fanus Control Model: 16/18/21 Fanuc Alarm Description Data exceeding the maximum allowable number of digits was input. (Refer to the item of max. programmable dimensions.)

Fanuc Alarm 7: ILLEGAL USE OF DECIMAL POINT Fanus Control Model: 16/18/21 Fanuc Alarm Description Decimal point “.” input error (A decimal point was input after an address with which it can not be used. Or two decimal points were input.) Modify the program.

In the world of CNC machining, encountering a FANUC 401 Alarm can bring production to a grinding halt. This specific error is one of the most common—yet occasionally frustrating—faults found in FANUC Alpha and Beta series drive systems. Specifically, the 401 alarm stands for “V-Ready Off.” In simpler terms, the CNC control is expecting the…

Fanuc CNC Alarm 33: NO SOLUTION AT CRC Fanus Control Model: Series 16 / 18 / 21 (M and T Series) Description During tool radius compensation (G41/G42), the intersection point of two geometric lines or arcs fails to be detected. How to Fix Alarm Correct the tool path in the G-code program, or go to…