Fanuc Alarm 21: ILLEGAL PLANE AXIS COMMANDED
Fanus Control Model: 16/18/21
Fanuc Alarm Description
An axis not included in the selected plane (by using G17, G18, G19) was commanded in circular interpolation. Modify the program.
Fanuc Alarm 25: CANNOT COMMAND F0 IN G02/G03 Fanus Control Model: 16/18/21 Fanuc Alarm Description F0 (fast feed) was instructed by F1 –digit column feed in circular interpolation. Modify the program.
Fanuc Alarm 9: ILLEGAL ADDRESS INPUT Fanus Control Model: 16/18/21 Fanuc Alarm Description Unusable character was input in significant area. Modify the program.
Fanuc Alarm 157: TOO MANY TOOL GROUPS Fanus Control Model: 16i / 18i series, 21 / 21i series Description Each control model has a defined number of tool groups. This alarm is displayed when this number exceeds the machine’s limit. If the programmer does not delete unnecessary tool groups, the control stops the machine’s operation….
Fanuc Alarm 3: TOO MANY DIGITS Fanus Control Model: 16/18/21 Fanuc Alarm Description Data exceeding the maximum allowable number of digits was input. (Refer to the item of max. programmable dimensions.)
Fanuc Alarm 70: NO PROGRAM SPACE IN MEMORY Fanus Control Model: 16/18/21 Fanuc Alarm Description The memory area is insufficient. Delete any unnecessary programs, then retry.
Fanuc Alarm 74: ILLEGAL PROGRAM NUMBER Fanus Control Model: 16/18/21 Fanuc Alarm Description The program number is other than 1 to 9999. Modify the program number.