Fanuc Alarm 29: ILLEGAL OFFSET VALUE

Fanuc Alarm 69: FORMAT ERROR IN G70–G73 Fanus Control Model: 16/18/21 Fanuc Alarm Description T Series;The final move command in the blocks specified by P and Q of G70, G71, G72, and G73 ended with chamfering or corner R. Modify the program.

Fanuc Alarm 85: COMMUNICATION ERROR Fanus Control Model: Series 16, 18, 21 (including i-Series) Description This alarm appears when there is an interruption in data transmission between the controller and an external device (such as PC or USB). This alarm indicates that while you were loading or downloading a program, an “Overrun,” “Framing,” or “Parity”…

Fanuc Alarm 10: Improper G-Code Fanus Control Model: Specific Fanuc model (e.g., Series 0i, 16i, 18i, 21i). Description The machine has received a G-code that it does not recognize or that does not exist in its system. You may have accidentally written an incorrect code, for example, writing G001 or G100 instead of G01, which…

Fanuc Alarm 20: OVER TOLERANCE OF RADIUS Fanus Control Model: 16/18/21 Fanuc Alarm Description In circular interpolation (G02 or G03), difference of the distance between the start point and the center of an arc and that between the end point and the center of the arc exceeded the value specified in parameter No. 3410.

Fanuc Alarm 137: M-CODE & MOVE CMD IN SAME BLK Fanus Control Model: 0 (0-M, 0-T, 0-i) Description An M-code (which is a machine function such as spindle on/off or coolant control) and a ‘Move Command’ (such as X, Y, or Z axis movement) have been combined in a way that is prohibited by Fanuc…

Fanuc Alarm PS449: Illegal Tool Life Data Fanus Control Model: Series 15 (Model A and B), Series 10 / 11 / 12 Description This alarm occurs when there is a technical error in the Tool Life Management data in the machine control system or the specified life limit for a particular tool in the system…