Fanuc Alarm PS067: G70–G73 IN FORBIDDEN MODE

Fanuc Alarm PS058: S–COMMAND OUT OF RANGE Fanus Control Model: 0i-D/F series, 16i/18i/21i, and the 30i/31i/32i series. Description If a spindle speed is written in the program that exceeds the machine’s operating capacity, the system will immediately stop the operation and an alarm will appear on the screen. How to Fix Alarm Check the S…

Fanuc Alarm 47: ILLEGAL AXIS SELECT Fanus Control Model: Fanuc Series 16, 18, 21, and the 16i/18i/21i Model C Description when the control system receives a command to move an axis that has not been properly defined, or when there is a conflict in the axis selection logic. How to Fix Alarm To resolve it,…

Fanuc Alarm PS001: TH PARITY ALARM Fanus Control Model: Series 0 (0-M, 0-T, 0-MC, etc.), Series 0i / 16i / 18i / 21i Description This alarm indicates a technical fault when the information exchange between the inverter’s internal control board and the sensors is not correct. Another reason could be a fault in the system parameters or…

Fanuc Alarm PS123: Missing END Statement Fanus Control Model: Series 0i, 16i, 18i, 21i, and 30i/31i/32i controls Description When you forget to write END at the end of a program using commands like `WHILE` or `IF` in a macro program, the CNC system gets confused and generates an alarm. How to Fix Alarm Go into…

Fanuc Alarm 157: TOO MANY TOOL GROUPS Fanus Control Model: 16i / 18i series, 21 / 21i series Description Each control model has a defined number of tool groups. This alarm is displayed when this number exceeds the machine’s limit. If the programmer does not delete unnecessary tool groups, the control stops the machine’s operation….

Fanuc Alarm 3: Too Many Digits Error Fanus Control Model: Fanuc 0i, 16i/18i, and 21i/31i , 30i/31i/32i/0i-MODEL B Description Entering more digits than allowed in a program. Using non-standard digits in a G-code command for an X, Y, Z position or a speed value. This error usually indicates human error or a problem with the…