Fanuc Alarm 5235: COMMUNICATION ERROR
Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series
A communication error occurred during communication with the built–in Handy File.
Have you faced Fanuc Alarm 5235 COMMUNICATION ERROR on your machine? Share your experience or troubleshooting tips in the comments below to help other CNC operators and programmers clear this error faster!
Fanuc Alarm 5228: SAME NAME USED Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description There are duplicate file names in the built–in Handy File. Have you faced Fanuc Alarm 5228 SAME NAME USED on your machine? Share your experience or troubleshooting tips in the comments below to help other…
Fanuc Alarm 5114: NOT STOP POSITION (G05.1 Q1) Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description At the time of restart after manual intervention, the coordinates at which the manual intervention occurred have not been restored. Have you faced Fanuc Alarm 5114 NOT STOP POSITION (G05.1 Q1) on your…
In the world of CNC machining, encountering a FANUC 401 Alarm can bring production to a grinding halt. This specific error is one of the most common—yet occasionally frustrating—faults found in FANUC Alpha and Beta series drive systems. Specifically, the 401 alarm stands for “V-Ready Off.” In simpler terms, the CNC control is expecting the…
Fanuc Alarm 4705: PROGRAM ERROR (OT –) Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The value specified in the Z-axis move command exceeded the negative value of stored stroke limit 1. (Advance check) Have you faced Fanuc Alarm 4705 PROGRAM ERROR (OT –) on your machine? Share your…
Fanuc Alarm 4535: U/V MACRO NESTING ERROR Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description An attempt was made to call a macro which is defined three times or more using a U or V macro command. An attempt was made to store 15 or more macros in…
Fanuc Alarm 5403: SPL:CAN NOT MAKE VECTOR Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description Three–dimensional tool compensation vectors cannot be generated.;· When a three–dimensional tool compensation vector is created for the second or subsequent point, that point, previous point, and next point are on the same straight…