Fanuc Alarm 5415: NURBS:ILLEGAL CANCEL
Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series
Although NURBS interpolation is not completed yet, the NURBS interpolation mode is turned off.
Have you faced Fanuc Alarm 5415 NURBS:ILLEGAL CANCEL on your machine? Share your experience or troubleshooting tips in the comments below to help other CNC operators and programmers clear this error faster!
Fanuc Alarm 65: ILLEGAL COMMAND IN G71–G73 Fanus Control Model: 16/18/21 Fanuc Alarm Description T Series;1. G00 or G01 is not commanded at the block with the sequence number which is specified by address P in G71, G72, or G73 command. 2. Address Z(W) or X(U) was commanded in the block with a sequence number…
Fanuc Alarm 5010: END OF RECORD Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The end of record (%) was specified. I/O is incorrect. modify the program. Have you faced Fanuc Alarm 5010 END OF RECORD on your machine? Share your experience or troubleshooting tips in the comments below…
Fanuc Alarm 5059: RADIUS IS OUT OF RANGE Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description A radius exceeding nine digits has been specified for circular interpolation with the center of the arc specified with I, J, and K. Have you faced Fanuc Alarm 5059 RADIUS IS OUT…
Fanuc Alarm 5405: ILLEGAL PARAMETER IN G41.2/ G42.2 Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The parameter setting that determines the relationship between the rotation axis and rotation plane is incorrect. Have you faced Fanuc Alarm 5405 ILLEGAL PARAMETER IN G41.2/ G42.2 on your machine? Share your experience…
Fanuc Alarm 5035: NO FEEDRATE COMMANDED B–AXS Fanuc Control Model: 16i / 18i / 21i-T (Model A and Model B), 0i-T / 0i-Mate-T, 16 / 18-T Fanuc Alarm Description T series A feedrate was not specified for cutting feed about the B–axis. Have you faced Fanuc Alarm 5035 NO FEEDRATE COMMANDED B–AXS on your machine? Share…
Fanuc Alarm 0: MISSING MOVE AFTER CHF/CNR Fanuc Control Model: Fanuc 0i, 16i / 18i / 21i, 30i / 31i / 32i Fanuc Alarm 51 (PS0051) is a Program/Software alarm that occurs during Chamfering (CHF) or Corner Rounding (CNR) operations. It triggers when the controller encounters a chamfering/corner rounding block that is not immediately followed…