Fanuc Alarm 5155: NOT RESTART PROGRAM BY G05

Fanuc Alarm 5411: NURBS:ILLEGAL ORDER Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The number of steps is specified incorrectly. Have you faced Fanuc Alarm 5411 NURBS:ILLEGAL ORDER on your machine? Share your experience or troubleshooting tips in the comments below to help other CNC operators and programmers clear…

Fanuc Alarm 137: M-CODE & MOVE CMD IN SAME BLK Fanus Control Model: 0 (0-M, 0-T, 0-i) Description An M-code (which is a machine function such as spindle on/off or coolant control) and a ‘Move Command’ (such as X, Y, or Z axis movement) have been combined in a way that is prohibited by Fanuc…

Fanuc Alarm 413: SERVO ALARM: n–th AXIS – LSI OVERFLOW Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The contents of the error register for the n–th axis (axis 1–8) exceeded ±231 power. This error usually occurs as the result of an improperly set parameters. Have you faced…

Fanuc Alarm 4543: MULTI-PIECE Q COMMAND ERROR Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description Although G98P0 was specified, the Q value for the G74 command was not 1 or 3. Although G98K0 was specified, the Q value for the G73 command was not 1 or 2. Have…

Fanuc Alarm 5157: PARAMETER ZERO Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description Zero is set in the parameter for the maximum cutting feedrate (parameter No. 1422 or 1432). Zero is set in the parameter for the acceleration/deceleration before interpolation (parameter No. 1770 or 1771). Set the parameter…

Fanuc Alarm 4506: ILLEGAL COMMAND IN SHARE PROOFS Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description In a shear proof (G86) command, the tool size (P) was set to zero, or the blanking length (I) was 1.5 times larger than the tool size (P) or less. Alternatively, I,…