Fanuc Alarm 5135: FSSB: ERROR MODE

Fanuc Alarm 5004: HPCC NOT READY Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i Fanuc Alarm Description (M series) High–precision contour control is not ready. Have you faced Fanuc Alarm 5004 HPCC NOT READY on your machine? Share your experience or troubleshooting tips in the comments below to help other CNC operators and programmers clear…

Fanuc Alarm 5060: ILLEGAL PARAMETER IN G02.3/G03.3 Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description There is a parameter setting error. Parameter No. 5641 (setting of the linear axis) is not set. The axis set in parameter No. 5641 is not a linear axis. Parameter No. 5642 (setting…

Fanuc Alarm 5448: CRC:INTERFERENCE TO AVD. Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description In the interference check evade function of cutter compensation, a further interference occurs for an already created interference evade vector. Have you faced Fanuc Alarm 5448 CRC:INTERFERENCE TO AVD. on your machine? Share your experience…

Fanuc Alarm 5405: ILLEGAL PARAMETER IN G41.2/ G42.2 Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The parameter setting that determines the relationship between the rotation axis and rotation plane is incorrect. Have you faced Fanuc Alarm 5405 ILLEGAL PARAMETER IN G41.2/ G42.2 on your machine? Share your experience…

Fanuc Alarm 14: ILLEGAL LEAD COMMAND Fanuc Series 0i (0i-TC, 0i-TD, 0i-TF) Fanuc Series 16i / 18i / 21i Fanuc Series 30i / 31i / 32i Description The wrong feed rate and lead limit of the (Threading) process is higher or lower than the limit set in the program, or there is an error in…