Fanuc Alarm 4543: MULTI-PIECE Q COMMAND ERROR

Fanuc Alarm 5436: PARAMETER SETTING ERROR 1 Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description Incorrect parameter setting (setting of the rotation axis) Have you faced Fanuc Alarm 5436 PARAMETER SETTING ERROR 1 on your machine? Share your experience or troubleshooting tips in the comments below to help other…

Fanuc Alarm 94: P TYPE NOT ALLOWED (COORD CHG) Fanuc Control Model: Fanuc 16 / 18 / 21, 16i/18i/21i, and 30i/31i/32i series Fanuc Alarm Description P type cannot be specified when the program is restarted. (After the automatic operation was interrupted, the coordinate system setting operation was performed.) Perform the correct operation according to the…

Fanuc Alarm 5058: G35/G36 FORMAT ERROR Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description A command for switching the major axis has been specified for circular threading. Alternatively, a command for setting the length of the major axis to 0 has been specified for circular threading. Have you…

Fanuc Alarm 4542: MULTI-PIECE COMMAND ERROR Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description Although G98P0 was specified, the G73 command was issued. Although G98K0 was specified, the G74 command was issued. Have you faced Fanuc Alarm 4542 MULTI-PIECE COMMAND ERROR on your machine? Share your experience or troubleshooting…

Fanuc Alarm 5198: FSSB: ID DATA NOT READ Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description Temporary assignment failed, so amplifier initial ID information could not be read. Have you faced Fanuc Alarm 5198 FSSB: ID DATA NOT READ on your machine? Share your experience or troubleshooting tips in…

Fanuc Alarm 5059: RADIUS IS OUT OF RANGE Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description A radius exceeding nine digits has been specified for circular interpolation with the center of the arc specified with I, J, and K. Have you faced Fanuc Alarm 5059 RADIUS IS OUT…