Fanuc Alarm 4540: MULTI-PIECE COMMAND WITHIN MACRO

Fanuc Alarm PS058: S–COMMAND OUT OF RANGE Fanus Control Model: 0i-D/F series, 16i/18i/21i, and the 30i/31i/32i series. Description If a spindle speed is written in the program that exceeds the machine’s operating capacity, the system will immediately stop the operation and an alarm will appear on the screen. How to Fix Alarm Check the S…

Fanuc Alarm 4549: ILLEGAL TOOL DATA FORMAT Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The quantity of tool data patterns to be saved is too large to fit the usable area (16 KB). Have you faced Fanuc Alarm 4549 ILLEGAL TOOL DATA FORMAT on your machine? Share your…

Fanuc Alarm PS123: Missing END Statement Fanus Control Model: Series 0i, 16i, 18i, 21i, and 30i/31i/32i controls Description When you forget to write END at the end of a program using commands like `WHILE` or `IF` in a macro program, the CNC system gets confused and generates an alarm. How to Fix Alarm Go into…

Fanuc Alarm PS449: Illegal Tool Life Data Fanus Control Model: Series 15 (Model A and B), Series 10 / 11 / 12 Description This alarm occurs when there is a technical error in the Tool Life Management data in the machine control system or the specified life limit for a particular tool in the system…

Fanuc Alarm 4532: IMPROPER U/V MACRO NUMBER Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The number of an inhibited macro (number beyond the range from 01 to 99) was specified in a U or V macro command. Have you faced Fanuc Alarm 4532 IMPROPER U/V MACRO NUMBER on…

Fanuc Alarm 4538: W NO. NOT FOUND IN MULTI-PIECE Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description Macro number W specified in the command for taking multiple workpieces (G73, G74) is not stored. Have you faced Fanuc Alarm 4538 W NO. NOT FOUND IN MULTI-PIECE on your machine? Share…