Fanuc Alarm 4534: W MACRO NUMBER NOT FOUND
Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series
Macro number W specified in a U or V macro command is not stored.
Have you faced Fanuc Alarm 4534 W MACRO NUMBER NOT FOUND on your machine? Share your experience or troubleshooting tips in the comments below to help other CNC operators and programmers clear this error faster!
Fanuc Alarm 5110: IMPROPER G–CODE Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description An illegal G code was specified in look–ahead control mode (multi blocks are read in advance). A command was specified for the index table indexing axis in look– ahead control mode (multi blocks are read…
Fanuc Alarm 4535: U/V MACRO NESTING ERROR Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description An attempt was made to call a macro which is defined three times or more using a U or V macro command. An attempt was made to store 15 or more macros in…
Fanuc CNC Alarm 33: NO SOLUTION AT CRC Fanus Control Model: Series 16 / 18 / 21 (M and T Series) Description During tool radius compensation (G41/G42), the intersection point of two geometric lines or arcs fails to be detected. How to Fix Alarm Correct the tool path in the G-code program, or go to…
Fanuc Alarm PS449: Illegal Tool Life Data Fanus Control Model: Series 15 (Model A and B), Series 10 / 11 / 12 Description This alarm occurs when there is a technical error in the Tool Life Management data in the machine control system or the specified life limit for a particular tool in the system…
Fanuc Alarm 5040: CAN NOT COMMANDED B–AXS MOVE Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description T series;The machine could not move about the B–axis because parameter No.8250 was incorrectly specified, or because the PMC axis system could not be used. Have you faced Fanuc Alarm 5040 CAN…
Fanuc Alarm 2: TV PARITY ALARM Fanus Control Model: 16/18/21 Fanuc Alarm Description TV alarm (The number of characters in a block is odd). This alarm will be generated only when the TV check is effective.