Fanuc Alarm 252: ATC SPINDLE ALARM
Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series
An excessive error arose during spindle positioning for ATC. For details, refer to diagnosis No. 531. (Only for ROBODRILL)
Have you faced Fanuc Alarm 252 ATC SPINDLE ALARM on your machine? Share your experience or troubleshooting tips in the comments below to help other CNC operators and programmers clear this error faster!
Fanuc Alarm 5447: CRC:DANGEROUS AVOIDANCE Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The interference check evade function of cutter compensation determines that an evade operation will lead to danger. Have you faced Fanuc Alarm 5447 CRC:DANGEROUS AVOIDANCE on your machine? Share your experience or troubleshooting tips in the…
Fanuc Alarm 96: P TYPE NOT ALLOWED (WRK OFS CHG) Fanuc Control Model: Series 16 / 18 / 21 and 16i / 18i / 21i, 160i / 180i / 210i, 0 / 0-Mate / 0i, 21 Model B, 30i / 31i / 32i Model A Fanuc Alarm Description P type cannot be specified when the…
Fanuc Alarm 5118: SPL: ERROR Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description After manual intervention with manual absolute mode set to on, NURBS interpolation was restarted. Have you faced Fanuc Alarm 5118 SPL: ERROR on your machine? Share your experience or troubleshooting tips in the comments below to…
Fanuc Alarm 5212: SCREEN COPY: PARAMETER ERROR Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description There is a parameter setting error. Check that 4 is set as the I/O channel. Have you faced Fanuc Alarm 5212 SCREEN COPY: PARAMETER ERROR on your machine? Share your experience or troubleshooting tips…
Fanuc Alarm 5044: G68 FORMAT ERROR Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description M series;A G68 command block contains a format error. This alarm is issued in the following cases;1. I, J, or K is missing from a G68 command block (missing coordinate rotation option).;2. I, J,…
Fanuc Alarm 76: ADDRESS P NOT DEFINED Fanuc Control Model: Series 16 / 18 / 21, 16i / 18i / 21i, 0i / 0i-Mate (Series 0i-A/B/C/D/F), 30i / 31i / 32i Model A / B, 21 Model B Fanuc Alarm Description Address P (program number) was not commanded in the block which includes an M98,…