Fanuc Alarm 219: COMMAND G250/G251 INDEPENDENTLY
Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series
T series
G251 and G250 are not independent blocks.
Have you faced Fanuc Alarm 219 COMMAND G250/G251 INDEPENDENTLY on your machine? Share your experience or troubleshooting tips in the comments below to help other CNC operators and programmers clear this error faster!
Fanuc Alarm 5257: G41/G42 NOT ALLOWED IN MDI MODE Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description M series;G41/G42 (cutter compensation C: M series) was specified in MDI mode. (Depending on the setting of bit 4 of parameter No. 5008) Have you faced Fanuc Alarm 5257 G41/G42 NOT…
Fanuc Alarm 5306: MODE CHANGE ERROR Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description In a one–touch macro call, mode switching at the time of activation is not performed correctly. Have you faced Fanuc Alarm 5306 MODE CHANGE ERROR on your machine? Share your experience or troubleshooting tips in…
Fanuc Alarm 4530: A/B MACRO NUMBER ERROR Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The number for storing and calling by an A or B macro was set to a value beyond the range from 1 to 5. Have you faced Fanuc Alarm 4530 A/B MACRO NUMBER…
Fanuc Alarm 4540: MULTI-PIECE COMMAND WITHIN MACRO Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The command for taking multiple workpieces (G73, G74) was specified when a U or V macro was being stored. Have you faced Fanuc Alarm 4540 MULTI-PIECE COMMAND WITHIN MACRO on your machine? Share your…
Fanuc Alarm 229: CAN NOT KEEP SYNCHRO–STATE Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description T series;This alarm is generated in the following circumstances.;1 When the synchro/mixed state could not be kept due to system overload.;2 The above condition occurred in CMC devices (hardware) and synchro– state could…
Fanuc Alarm 74: ILLEGAL PROGRAM NUMBER Fanus Control Model: 16/18/21 Fanuc Alarm Description The program number is other than 1 to 9999. Modify the program number.