Fanuc Alarm 81: OFFSET NUMBER NOT FOUND IN G37

Fanuc Alarm 14 CAN NOT COMMAND G95 Fanus Control Model: Fanuc 0 (0-M/0-T), 0i, and 16/18/21 series controls Description Technically, the G95 code tells the machine to cut per revolution, which is directly related to the spindle speed. The most common cause of this alarm is that the Spindle Digital Encoder is either not installed…

Fanuc Alarm 125: FORMAT ERROR IN MACRO Fanuc Control Model: Fanuc 0i-D/F, 16i/18i/21i, and 30i/31i/32i series Fanuc Alarm Description (Formula) format is erroneous. Modify the program. Have you faced Fanuc Alarm 125 FORMAT ERROR IN MACRO on your machine? Share your experience or troubleshooting tips in the comments below to help other CNC operators and…

Fanuc Alarm 7: ILLEGAL USE OF DECIMAL POINT Fanuc Control Model: Fanuc 0i-D/F, 16i/18i/21i, and 30i/31i/32i series Fanuc Alarm Description Decimal point “.” input error (A decimal point was input after an address with which it can not be used. Or two decimal points were input.) Modify the program. Have you faced Fanuc Alarm 7…

Fanuc Alarm 80: G37 ARRIVAL SIGNAL NOT ASSERTED Fanuc Control Model: Fanuc 0i-D/F, 16i/18i/21i, and 30i/31i/32i series Fanuc Alarm Description M series In the automatic tool length measurement function (G37), the measurement position reach signal (XAE, YAE,or ZAE) is not turned on within an area specified in parameter 6254 (value ε).This is due to a…