Fanuc Alarm 79: PROGRAM VERIFY ERROR
Fanuc Control Model: 0-i, 16/18/21, 16i/18i/21i, 30i/31i/32i
In memory or program collation, a program in memory does not match the program being verified.
Have you faced Fanuc Alarm 79 PROGRAM VERIFY ERROR on your machine? Share your experience or troubleshooting tips in the comments below to help other CNC operators and programmers clear this error faster!
Fanuc Alarm 5252: ILLEGAL P COMMAND IN G54.2 Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description The P value specifying the offset number of a fixture offset is too large. Correct the program. Have you faced Fanuc Alarm 5252 ILLEGAL P COMMAND IN G54.2 on your machine? Share your…
Fanuc Alarm 4510: ILLEGAL COMMAND IN LINE-PUNCH Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description In a linear punching (G45) command, the traveling distance was set to zero or a value 1.5 times larger than the tool size (P) or less. Alternatively, P was not specified. Have you…
Fanuc Alarm 96: P TYPE NOT ALLOWED (WRK OFS CHG) Fanuc Control Model: Series 16 / 18 / 21 and 16i / 18i / 21i, 160i / 180i / 210i, 0 / 0-Mate / 0i, 21 Model B, 30i / 31i / 32i Model A Fanuc Alarm Description P type cannot be specified when the…
Fanuc Alarm 5232: DATA OVER–FLOW Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description There is not enough floppy disk space in the built–in Handy File. Have you faced Fanuc Alarm 5232 DATA OVER–FLOW on your machine? Share your experience or troubleshooting tips in the comments below to help other…
Fanuc Alarm 4506: ILLEGAL COMMAND IN SHARE PROOFS Fanuc Control Model: 16 / 18 / 21-Series, 16i/18i/21i and 30i/31i/32i series Fanuc Alarm Description In a shear proof (G86) command, the tool size (P) was set to zero, or the blanking length (I) was 1.5 times larger than the tool size (P) or less. Alternatively, I,…
Fanuc Alarm 0: MISSING MOVE AFTER CHF/CNR Fanuc Control Model: Fanuc 0i, 16i / 18i / 21i, 30i / 31i / 32i Fanuc Alarm 51 (PS0051) is a Program/Software alarm that occurs during Chamfering (CHF) or Corner Rounding (CNR) operations. It triggers when the controller encounters a chamfering/corner rounding block that is not immediately followed…