Fanuc Alarm 58: END POINT NOT FOUND

Fanuc Alarm 62: ILLEGAL COMMAND IN G71–G76 Fanus Control Model: 16/18/21 Fanuc Alarm Description T Series;1. The depth of cut in G71 or G72 is zero or negative value. 2. The repetitive count in G73 is zero or negative value. 3. the negative value is specified to Δi or Δk is zero in G74 or…

Fanuc Alarm 4 ADDRESS NOT FOUND Fanus Control Model: Series 0/00/0-Mate and Series 10/11/12 Description The controller encounters an ‘Address’ or ‘Word’ within the program that it cannot recognize. When writing G-code or M-code, selecting a letter or number that does not exist in the system of this machine. How to Fix Alarm Check for…

A Fanuc Alarm 402 is a common but critical error that indicates a Servo Alarm: SV Overload. Essentially, the CNC controller has detected that the electrical current being drawn by a specific axis motor is exceeding its rated capacity for too long. The system triggers this alarm as a protective measure to prevent the motor…

Fanuc Alarm 60: SEQUENCE NUMBER NOT FOUND Fanus Control Model: 16/18/21 Fanuc Alarm Description Commanded sequence number was not found in the sequence number search. Check the sequence number.

Fanuc Alarm 9: ILLEGAL ADDRESS INPUT Fanus Control Model: 16/18/21 Fanuc Alarm Description Unusable character was input in significant area. Modify the program.

Fanuc Alarm 86: DR SIGNAL OFF Fanus Control Model: Fanuc 16, 18, and 21 Series (including i-series), Fanuc 0/0i Series (0-M, 0-T, 0i-MA, 0i-TB, 0i-MC, etc.) Description This simply means that the controller is not receiving a “Data Set Ready” (DSR) signal from the external device PC or laptop. This problem mostly occurs when you…