Fanuc Alarm 27: NO AXES COMMANDED IN G43/G44
Fanuc Control Model: Series 16 / 18 / 21 (e.g., 16-M, 18i-M, 21i-M)
This alarm typically the system attempts .
Have you faced Fanuc Alarm 27 NO AXES COMMANDED IN G43/G44 on your machine? Share your experience or troubleshooting tips in the comments below to help other CNC operators and programmers clear this error faster!
Fanuc Alarm 14 CAN NOT COMMAND G95 Fanus Control Model: Fanuc 0 (0-M/0-T), 0i, and 16/18/21 series controls Description Technically, the G95 code tells the machine to cut per revolution, which is directly related to the spindle speed. The most common cause of this alarm is that the Spindle Digital Encoder is either not installed…
Fanuc Alarm 81: OFFSET NUMBER NOT FOUND IN G37 Fanuc Control Model: Fanuc 0i-D/F, 16i/18i/21i, and 30i/31i/32i series Fanuc Alarm Description M series Tool length automatic measurement (G37) was specified without a H code.(Automatic tool length measurement function) Modify the program. Have you faced Fanuc Alarm 81 OFFSET NUMBER NOT FOUND IN G37 on your…
Fanuc Alarm 82: T–CODE NOT ALLOWED IN G37 Fanuc Control Model: Fanuc 0i-D/F, 16i/18i/21i, and 30i/31i/32i series Fanuc Alarm Description T series; T code and automatic tool compensation (G36, G37) were specified in the same block. (Automatic tool compensation function) Modify the program. Have you faced Fanuc Alarm 82 T–CODE NOT ALLOWED IN G37 on…
Fanuc Alarm 97: P TYPE NOT ALLOWED (AUTO EXEC) Fanuc Control Model: Fanuc 0i-D/F, 16i/18i/21i, and 30i/31i/32i series Fanuc Alarm Description P type cannot be directed when the program is restarted.(After power ON, after emergency stop or P/S alarm 94 to 97 were reset, no automatic operation is performed).Perform automatic operation. Have you faced Fanuc…
Fanuc Alarm 99: MDI EXEC NOT ALLOWED AFT.SEARCH Fanuc Control Model: Series 0i (Model B, C, D, F), 16i / 18i / 21i, 30i / 31i / 32i Fanuc Alarm Description After completion of search in program restart, a move command is given with MDI. Move axis before a move command or don’t interrupt MDI…
Fanuc Alarm 98: G28 FOUND IN SEQUENCE RETURN Fanuc Control Model: Series 0i (Model B, C, D, F), 16i/18i/21i, and 30i/31i/32i series Fanuc Alarm Description A command of the program restart was specified without the reference position return operation after power ON or emergency stop, and G28 was found during search. Perform the reference position…